Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system

The indentation technique is widely used in measuring the mechanical properties of soft matter at the microscale or nanoscale,but still faces challenges by these unique properties as well as the consequent strong surface adhesion, including the strong nonlinear effect, unclear judgment of the contact point, difficulties in estimating the contact area, and the risk of the indenter piercing the sample. Here we propose a two-step method to solve these problems: lay a hard film on a soft matter, and obtain the viscoelastic properties of this soft matter through the indentation response of this composite structure. We first establish a theoretical indentation model of the hard film-soft substrate system based on the theory of plates, elastic-viscoelastic correspondence principle and Boltzmann superposition principle. To verify the correctness of this method, we measure the mechanical properties of the methyl vinyl silicone rubber(MVSR) covered by a Cu nanofilm. Finally, we test the effectiveness and error sensitivity of this method with the finite element method(FEM). The results show that our method can accurately measure the mechanical properties of soft matter, while effectively circumventing the problems of the traditional indentation technique.     

A New Concept for Obtaining SnO2 Fiber‐in‐Tube Nanostructures with Superior Electrochemical Properties

Tin oxide (SnO₂) nanotubes with a fiber‐in‐tube structure have been prepared by electrospinning and the mechanism of their formation has been investigated. Tin oxide‐carbon composite nanofibers with a filled structure were formed as an intermediate product, which were then transformed into SnO₂ nanotubes with a fiber‐in‐tube structure during heat treatment at 500 °C. Nanofibers with a diameter of 85 nm were found to be located inside hollow nanotubes with an outer diameter of 260 nm. The prepared SnO₂ nanotubes had well‐developed mesopores. The discharge capacities of the SnO₂ nanotubes at the 2nd and 300th cycles at a current density of 1 A g^?1 were measured as 720 and 640 mA h g^?1, respectively, and the corresponding capacity retention measured from the 2nd cycle was 88 %. The discharge capacities of the SnO₂ nanotubes at incrementally increased current densities of 0.5, 1.5, 3, and 5 A g^?1 were 774, 711, 652, and 591 mA h g^?1, respectively. The SnO₂ nanotubes with a fiber‐in‐tube structure showed superior cycling and rate performances compared to those of SnO₂ nanopowder. The unique structure of the SnO₂ nanotubes with a fiber@void@tube configuration improves their electrochemical properties by reducing the diffusion length of the lithium ions, and also imparts greater stability during electrochemical cycling.     

Enantiomeric Cyclic Peptides with Different Caco‐2 Permeability Suggest Carrier‐Mediated Transport

Recently, oral absorption of cyclic hexapeptides was improved by N‐methylation of their backbone amides. However, the number and position of N‐methylations or of solvent exposed NHs did not correlate to intestinal permeability, measured in a Caco‐2 model. In this study, we investigate enantiomeric pairs of three polar and two lipophilic peptides to demonstrate the participation of carrier‐mediated transporters. As expected, all the enantiomeric peptides exhibited identical lipophilicity (logD_7.4) and passive transcellular permeability determined by the parallel artificial membrane permeability assay (PAMPA). However, the enantiomeric polar peptides exhibited different Caco‐2 permeability (P_app) in both directions a–b and b–a. The same trend was observed for one of the lipophilic peptide, whereas the second lipophilic enantiomer pair showed identical Caco‐2 permeability (within the errors). These findings provide the first evidence for the involvement of carrier‐mediated transport for peptides, especially for those of polar nature.     

Unprecedented Oxidative Addition and Metal‐Only Lewis Pair Chemistry of Antimony Trihalides

Reaction of the zero‐valent platinum complex [Pt(PCy₃)₂] with SbF₃ generates the cationic diplatinum stibenium complex [{(Cy₃P)₂Pt}₂(μ‐SbF₂)]⁺, the first unsupported metal‐only Lewis pair containing an antimony‐centered Lewis acid. In contrast, SbCl₃ undergoes oxidative addition to [Pt(PCy₃)₂], resulting in the dihalostibanyl complex trans‐[PtCl(SbCl₂)(PCy₃)₂], the first example of oxidative addition of an antimony–halide bond to a transition metal.     

Strain induced strengthening of soft thermoplastic polyurethanes under cyclic deformation

We investigate the cyclic mechanical behavior in uniaxial tension of three different commercial thermoplastic polyurethane elastomers (TPU) often considered as a sustainable replacement for common filled elastomers. All TPU have similar hard segment contents and linear moduli but sensibly different large strain properties as shown by X-ray analysis. Despite these differences, we found a stiffening effect after conditioning in step cyclic loading which greatly differs from the common softening (also referred as Mullins effect) observed in chemically crosslinked filled rubbers. We propose that this self-reinforcement is related to the fragmentation of hard domains, naturally present in TPU, in smaller but more numerous sub-units that may act as new physical crosslinking points. The proposed stiffening mechanism is not dissimilar to the strain-induced crystallization observed in stretched natural rubber, but it presents a persistent nature. In particular, it may cause a local reinforcement where an inhomogeneous strain field is present, as is the case of a crack propagating in cyclic fatigue, providing a potential explanation for the well-known toughness and wear resistance of TPU.     

New fabrication approach to develop a high birefringence photo-crosslinked film based on a sulfur-containing liquid crystalline molecule with large temperature dependence of birefringence

ABSTRACT

We present a new fabrication approach to achieve a high birefringence film by means of photopolymerization based on an alkylthio-containing rod-like liquid crystalline molecule exhibiting large temperature dependence of birefringence. We designed a new reactive mesogen having alkylthio linkages (BPM–S). It was found that BPM–S had a larger increment of birefringence with decreasing temperature, relative to commercially available alkoxy analog LC242. This result could be thought to be due to enhanced intermolecular attractive interaction for an alkylthio mesogen implied by the proximity of laterally neighboring molecules and cybotactic nematic tendency based on wide-angle X-ray measurement. The uniaxially-aligned photo-polymerized film for BPM–S showed higher birefringence than that for LC 242.     

Cycloaddition Reactions of an Active Cyclic Phosphane/Borane Pair with Alkenes,Alkynes, and Carbon Dioxide

The active six-membered cyclo-FLP 6 undergoes a rapid P/B addition reaction to carbon dioxide. At elevated temperature, the resulting heterobicyclo[2.2.2]octane derived product 7 undergoes ring opening and equilibrates with the cyclotetramer (7)₄ . In the large macrocyclic structure, four monomeric six-membered cyclo-FLP units are connected by four CO₂ molecules to form the supramolecular ring system. The P/B cyclo-FLP 6 undergoes a variety of additional cycloaddition reactions.     

Parallel Versus Antiparallel β-Sheet Structure in Cyclic Peptide Hybrids Containing γ- or δ-Cyclic Amino Acids

Cyclic peptides with disc-shaped structures have emerged as potent building blocks for the preparation of new biomaterials in fields ranging from biological to material science. In this work, we analyze in depth the self-assembling properties of a new type of cyclic peptides based on the alternation of α-residues and cyclic δ-amino acids (α,δ-CPs). To examine the preferred stacking properties adopted by cyclic peptides bearing this type of amino acids, we carried out a synergistic in vitro/in silico approximation by using simple dimeric models and then extended to nanotubes. Although these new cyclic peptides (α,δ-CPs) can interact either in a parallel or antiparallel fashion, our results confirm that although the parallel β-sheet is more stable, it can be switched to the antiparallel stacking by choosing residues that can establish favorable cross-strand interactions. Moreover, the subsequent comparison by using the same methodology but applied to α,γ-CPs models, up to the moment assumed as antiparallel-like d,l -α-CPs, led to unforeseen conclusions that put into question preliminary conjectures about these systems. Surprisingly, they tend to adopt a parallel β-sheet directed by the skeleton interactions. These results imply a change of paradigm with respect to cyclic peptide designs that should be considered for dimers and nanotubes.     

Optoelectronic Properties of Carbon-Bound Boron Difluoride Hydrazone Dimers

The creation of dimeric boron difluoride complexes of chelating N-donor ligands is a proven strategy for the enhancement of the optoelectronic properties of fluorescent dyes. We report dimers based on the boron difluoride hydrazone (BODIHY) framework, which offer unique and sometimes unexpected substituent-dependent absorption, emission, and electrochemical properties. BODIHY dimers have low-energy absorption bands (λ_max=421 to 479 nm, ϵ=17 200 to 39 900 m ⁻¹ cm⁻¹) that are red-shifted relative to monomeric analogues. THF solutions of these dimers exhibit aggregation-induced emission upon addition of water, with emission enhancement factors ranging from 5 to 18. Thin films of BODIHY dimers are weakly emissive as a result of the inner-filter effect, attributed to intermolecular π-type interactions. BODIHY dimers are redox-active and display two one-electron oxidation and two one-electron reduction waves that strongly depend on the N-aryl substituents. These properties are rationalized using density-functional theory calculations and X-ray crystallography experiments.     

Group 6 Oxyfluoro-Anion Salts of [XeF5]+ and [Xe2F11]+: Syntheses and Structures of [XeF5][M2O2F9] (M=Mo,W), [Xe2F11][M′OF5] (M′=Cr,Mo, W), [XeF5][HF2]⋅CrOF4, and [XeF5][WOF5]⋅XeOF4

The reactions of the fluoride-ion donor, XeF₆, with the fluoride-ion acceptors, M′OF₄ (M′=Cr, Mo, W), yield [XeF₅]⁺ and [Xe₂F₁₁]⁺ salts of [M′OF₅]⁻ and [M₂O₂F₉]⁻ (M=Mo, W). Xenon hexafluoride and MOF₄ react in anhydrous hydrogen fluoride (aHF) to give equilibrium mixtures of [Xe₂F₁₁]⁺, [XeF₅]⁺, [(HF)_nF]⁻, [MOF₅]⁻, and [M₂O₂F₉]⁻ from which the title salts were crystallized. The [XeF₅][CrOF₅] and [Xe₂F₁₁][CrOF₅] salts could not be formed from mixtures of CrOF₄ and XeF₆ in aHF at low temperature (LT) owing to the low fluoride-ion affinity of CrOF₄, but yielded [XeF₅][HF₂]⋅CrOF₄ instead. In contrast, MoOF₄ and WOF₄ are sufficiently Lewis acidic to abstract F⁻ ion from [(HF)_nF]⁻ in aHF to give the [MOF₅]⁻ and [M₂O₂F₉]⁻ salts of [XeF₅]⁺ and [Xe₂F₁₁]⁺. To circumvent [(HF)_nF]⁻ formation, [Xe₂F₁₁][CrOF₅] was synthesized at LT in CF₂ClCF₂Cl solvent. The salts were characterized by LT Raman spectroscopy and LT single-crystal X-ray diffraction, which provided the first X-ray crystal structure of the [CrOF₅]⁻ anion and high-precision geometric parameters for [MOF₅]⁻ and [M₂O₂F₉]⁻. Hydrolysis of [Xe₂F₁₁][WOF₅] by water contaminant in HF solvent yielded [XeF₅][WOF₅]⋅XeOF₄. Quantum-chemical calculations were carried out for M′OF₄, [M′OF₅]⁻, [M′₂O₂F₉]⁻, {[Xe₂F₁₁][CrOF₅]}₂, [Xe₂F₁₁][MOF₅], and {[XeF₅][M₂O₂F₉]}₂ to obtain their gas-phase geometries and vibrational frequencies to aid in their vibrational mode assignments and to assess chemical bonding.